F.A.Q
Q. Is Pixel chasing LED strip priced per metre?
A. Yes, Pixel chasing LED strip is priced per metre, add as much as you need into your cart ready for check-out.
Q. If I select 20 metres of strip into my cart will this come as 20 x 1 metre lengths or one length of 20 metres?
A. If you select 20 metres this will be dispatched as 4 x 5 metre reels.
Q. Does the strip come with soldered cable tails?
A. This product comes with cable tails soldered when ordering in multiples of 5 metres. For example, if you order 20 metres, you will receive 4 x 5 metre reels, each with a 2 metre cable tail soldered as standard, with no solder operation charge.
For any other quantity under a 5 metre reel, please select the soldered cable tail onto LED strip light option via the bespoke options link below to order up to 2 metres of cable soldered onto your LED strip light. For longer cable tails, please inform our team.
Q. Can I cut the strip down?
A. Yes, you can cut the strip along the cut points every 125mm.
| LED strip light specification |  |
|
| Pixel chasing LED strip natural white | Colour temperature: Natural white 4000k |
|
| Part number | LS24PIX-120-NW5 | |
| Brightness level |
Bright. |
|
| Recommended installation | Casino, bar, restaurant, gym, sports hall, theatre, signage. Domestic & Commercial areas. | |
| IP rating | IP20 | |
| Lumen Output | 1029 Lumens /m. | |
| Dimmable | Yes. | |
| Wattage | 14 w/m. | |
| Voltage | 24V. Constant voltage. | |
| LED quantity |
120 LEDS /m Pixel: 8 pix/M |
|
| Width of strip |
10mm. |
|
| Backing tape | Heavy duty 3M. Secure neatly onto clean surface. | |
| Maximum linear run length capacity | 5 metres. | |
| CRI (Colour rendering Index) | High: Rendering colours more realistically. | |
| Lifespan | Up to 50,000 hours. | |
| Cut points on the strip | Every 125mm - cut to measure. |
Purchase LED strip lights by the metre & select required quantity. If you need soldered cable tails click on bespoke options below.
NB: When ordering in quantities of 5 - Each 5 metre reel will be dispatched as standard, complete with 2 metre, 2 core soldered tail & protective heat shrink. E.g. 20 metres of strip (select quantity 20) - you will receive this as 4 x 5 metre reels, each reel with 2 metre soldered cable tail and protective heat shrink
For alternative measurements e.g. 3.5 metre pieces of strip, cut to measure & additional customisation (if required), select your quantity and shop bespoke options:
Shop bespoke options here
Shop 5 metre kit here
SUPPORT:
| Select compatible power supply (LED driver) based on length of LED strip. (Max run length of strip in one single run 5 metres). | (NB: When sharing a power supply between multiple lengths of LED strip, do not exceed the maximum load of the power supply) |
| Up to 1 metre | |
| 1.5m - Max load 2 metres | |
| 5m - Max load 5 metres |
|
Required steps & components to power pixel chasing LED strip:Powering one length.1. Soldered 2 core cable tail when powering one length of Pixel chasing.
2. Plug & Play soldered lead with pixel controller unit when powering one length of Pixel chasing.
3. Wireless wall controller inclusive of pixel controller unit. 4. 24V power supply - chart above. |
|
House LED strip in profile - Diffusion of light, heat dissipation & professional finish. |
SPECIFICATION:
Priced by the metre for a maximum single run length of 5 metres - (If longer run lengths over 5 metres are required refer to part number: LS24PIX-120-NW20).
LED strip is dispatched as one continuous length as per order quantity -Uncut, unless otherwise stated.
Cut to measure with soldered cable tails - Speak with our team to request a bespoke quotation. Alternatively, leave details and measurements for cut to measure LED strip & required length of soldered cable tails in the special instructions box provided at checkout (remember to select the correct cable & solder operation before completing your order).
Pixel chasing LED strip natural white
Inventory Last Updated: May 01, 2025