24v RGB COB strip.
Leading24-COB-RGB boasts an impressive 672 LEDs per metre featuring colour changing chips. A world-class, dot less lighting solution for accents in visible areas such as walls and ceilings.
This strip delivers a powerful combination of bright and vibrant colours that can be programmed to meet any creative domestic & commercial lighting solution.
Customisable to suit any Domestic | Commercial project.
F.A.Q
Q. Is 24v RGB COB strip priced per metre?
A. Yes, 24v RGB COB strip is priced per metre, add as much as you need into your cart ready for check-out.
Q. If I select 4 metres of strip into my cart will this come as 4 x 1m metre lengths or one length of 4 metres?
A. If you select 4 metres this will be dispatched as 1 x 4 metre piece of strip, unless you let us know otherwise.
Q. Does the strip come with soldered cable tails?
A. When ordering multiples of 5 metres, this product includes cable tails that are soldered. For instance, if you order 20 metres, you will receive 4 x 5 metre reels, each with a 2 metre cable tail already soldered at no extra cost.
For quantities less than a 5 metre reel, select the soldered cable tail onto LED strip light option, via the bespoke options link below, this includes up to 2 metres of cable soldered onto your LED strip light. For longer cable tails, please notify our team.
Q. Can I cut the strip down?
A. Yes, you can cut the strip along the cut points every 31.25mm.
Shop bespoke options here
SUPPORT:
| LED strip light specification |  |
|
| 24v RGB COB strip | Colour temperature RGB. |
|
| Part number | LS24-RGBCOB-672 | |
| Brightness level |
High brightness. |
|
| Recommended installation | Developed with 672 LEDS per metre for lower spotting effect for use on visible areas such as walls & ceilings. Lounge, bedroom, roof lantern, kitchen, bar, restaurant, gym, sensory room, casino, theatre, cinema room. | |
| IP rating | IP20 | |
| Dimmable | Yes. Compatible with various control systems | |
| Wattage | 13 w/m. | |
| Voltage | 24V. Constant voltage. | |
| LED quantity | 672 LEDS /m. | |
| Backing tape | Heavy duty 3M. Secure neatly onto clean surface. | |
| CRI (Colour rendering Index) | High: Rendering colours more realistically. | |
| Lifespan | Up to 50,000 hours. | |
| Cut points on the strip | Every 31.25mm - cut to measure. | |
| Warranty | 5 years. |
| Width of Strip | 10mm |
| Max Run length of strip | 5 metres in one linear length. 10 metres powered from the centre. |
| Select compatible power supply (LED driver) based on length of LED strip | (NB: When sharing a power supply between multiple lengths of LED strip, do not exceed the maximum load of the power supply) |
| Up to 1 metre |
20-24
|
| 1.5m - Max load 2 metres |
40-24
|
| 2.5m - Max load 5 metres |
100-24
|
| 5.5m - Max load 8 metres |
150-24
|
| 8.5m - Max load 12 metres. NB: Maximum single run length of LED strip - 5 metres. Power additional lengths separately when using a shared power supply. |
200-24
|
| 12.5m - Max load 18 metres. NB: Maximum single run length of LED strip - 5 metres. Power additional lengths separately when using a shared power supply. |
320-24
|
| Required components |
Soldered 4 core cable tail. RGBW Receiver unit Controller - Wall | hand held remote 24v Power supply (LED driver) |
| Compatible components | |
| Smart controller |
Wall controller - Colour change, set scenes, dim the strip, turn on/off. Hand held remote - Colour change, set scenes, dim the strip, turn on/off. Wifi controller - For use with smart phone. Colour change, set various scenes, dim the brightness, turn on/off. |
| Aluminium housing |
House LED strip in profile - Diffusion of light, heat dissipation & professional finish. |
SPECIFICATION:
Priced by the metre for a maximum single run length of 5 metres - (If longer run lengths over 5 metres are required, contact us for advice on how best to install this).
LED strip is dispatched as one continuous length as per order quantity - Uncut, unless otherwise stated.
Cut to measure with soldered cable tails - Speak with our team to request a bespoke quotation. Alternatively, leave details and measurements for cut to measure LED strip & required length of soldered cable tails in the special instructions box provided at checkout (remember to select the correct cable & solder operation before completing your order).
24v RGB COB strip
Inventory Last Updated: May 01, 2025