Restaurant lighting for the perfect ambience
Booking a table at your favourite restaurant is something a lot of us love to do. Its a time to catch up, enjoy some delicious food, wind down and relax.
The minute you walk through the door you immediately feel the ambience - The mood, temperature, music, decor, lighting - The atmosphere as a whole.
Lighting can effect our mood, which is why it is so important to select the correct product for the success of your restaurant, it’s well worth spending the time to get it right - You will undoubtedly want to give off a warm, feel good, lasting impression.
Outside:
First impressions go a long way. You will want your restaurant to stand out from the crowd and attract diners. Outdoor lighting is key here. Illuminating pathways and highlighting features, such as signs and waterfalls play a huge role. Outdoor lighting shouldn't be overlooked, it is just as important as your interior lighting.
IP67 LED strip is weatherproof and can uplift the entrance to your restaurant incredibly. We would recommend using a bright, dimmable strip, allowing you to adjust the brightness accordingly. See Part number: LS24HB-120-WW-IP67 as an example.
Inside:
Your restaurant will require different levels of brightness in each area. This is where dimmer modules come into play. You can set scenes and dim the strip accordingly in these areas, all from the same wall controller. Highlight food menus in a brighter lit area; seating areas will want to feel warm, emitting lower tones for mood lighting with a relaxing feel; staircase areas & rest rooms will need to be sufficiently lit, along with bar areas. Select a good quality, bright & dimmable LED strip with warm or natural tones. It is never advisable to sacrifice quality over cost - you do not want low quality, spotting and unreliable LED strip that is going to ruin the experience with nuisance flickering, poor quality appearance and early failure.
Conclusion:
To aid in the success of your restaurant, whether it’s casual or high-end fine dining, the lighting you provide for your diners wants to be safe, welcoming and comfortable.
See below links to our most popular & perfectly matched restaurant lighting for the perfect ambience.
COB strip - warm, natural & cool white options
COB strip wins every time, if you need bright, seamless lighting with zero dotting effect. The strip is fully dimmable using either a dimmable power supply or single colour receiver unit, with hand held remote control or stylish wall controller. COB strip sets the standard for high- end, flawless, world class lighting. Part number: LS24-COB-480
LSP24-120 - warm, natural & cool white options
Contractors love working with Lumistrip24-pro as much as we do! It is simply one of the best solutions on the market for run lengths over 5 metres and up to 20 metres. LSP24-120 has the capacity to power from one end for up to 20 metres in one linear length, saving the need for extra power supplies and breaks in the LED strip every 5 metres. This variant offers 120 LEDS in every metre. When installed in deeper profile, the strip offers bright, dimmable, low spotting effective light. Dim the strip using either a dimmable power supply or single colour receiver unit with hand held remote control or stylish wall controller This option is perfect for longer run lengths. Part number: LSP24-120
RGBW LED strip - red, green, blue & white
Colour changing LED strip - What's not to love! Add some wild and wonderful colour and create atmospheric lighting. You are spoilt for choice here - Set the colours to mix red, green, blue and white or power one colour at a time within different areas of the restaurant or to mark events. Colour change using an RGBW receiver unit for use with hand held remote or stylish wall controller. Part number: LS24-96-15.3/RGBW
LS24HB-120 - warm, natural & cool white options
Ultra bright! This strip is great for run lengths up to 5 metres. The strip is super bright with a high lumen output, ideal for bar areas whilst being fully dimmable according to current mood or event. Offering 120 LEDS in every metre, installed in aluminium profile, you will achieve a flawless bar of light. Dim the strip using either a dimmable power supply or single colour receiver unit with hand held remote control or stylish wall controller. Part number: LS24HB-120
If you need assistance with your selection, contact our technical design team with your ideas, measurements and lighting goals. We will email over our proposal for your consideration.
Once you have decided on your selection, we can offer a bespoke, made to measure service if needed, ready for installation on site.